News

Since the standard parts industry norms, improve the work carried out, the correct leadership of the district Party committee, the government's concern and support, active participation in the business owners, there are about 1600 companies are related formalities, some enterprises have achieved emission permits, the entire industry is in accordance with the "group of five" ideas steadily. However, individual enterprises to deal with the EIA procedures slow, hardware standards are not high, the existence of such drag on the management of thinking, affecting the region to regulate the progress of the upgrade. In order to speed up the progress of enterprise handling procedures and raise the standard of hardware construction, standard parts, factories, factories, hardware, environment and environment protection are now being upgraded

I. handling the time limit for EIA

Before August 30, 2017, to complete the EIA procedures; opened before September 5th; September 15th, third environmental monitoring, complete the inspection work; September 20th before the completion of acceptance and for the permit.

Two, enterprise standards to enhance standards

(a) the factory clean and tidy, shop facade unified paint; plant road hardening, landscaping, cleaning, planting trees, shrubs and flowers on both sides of the appropriate position and path; create a corporate culture and propaganda slogans on the wall.

(two) the workshop wall surface and the ground are hardened, and the interior of the workshop is kept clean and tidy. The workshop floor and production equipment are free from oil pollution; the walls are repainted and the floor brushing paint is painted on the floor.

(three) within the workshop, the production area, raw material area and finished product area are divided, and yellow tape marks are used to set up zoning signs.

(four) the wires and cables are orderly and orderly. They are in line with the requirements of the electric power department and are strictly prohibited from being privately connected.

(five) install the oil fume and dust treatment and other pollution prevention facilities according to the EIA requirements, selection of national recognition and the provincial environmental protection departments of environmental protection products, and ensure the normal operation; the other chimney height, hardened ground seepage coefficient according to the strict requirements of the EIA requirements.

(six) the production of raw materials and products division into the warehouse and placed orderly, no open storage; waste generated in the production process is not piled up at random, classified into the designated place custody; according to the EIA report, need to set up hazardous waste storage enterprises, in accordance with the relevant requirements of "hazardous waste pollution control standard" built using.

(seven) formulate and improve the safety production management system, safety technology operation process, environmental protection work responsibility, safety production work responsibility system, and put on the wall.

(eight) the staff should equip and wear labor protection articles according to their needs, build and perfect protective facilities, set up safety warning signs, and meet the standards of safety production.

(nine) during the trial production time to make the third party monitoring, monitoring, and compliance monitoring report issued by the environmental protection department, approval shall be put into production, apply for discharge permit must be within 10 days after approval by.

Three, September 2017, 20 before the standard parts of the sewage permits, enterprises will take measures to cut off electricity, and as appropriate, included in the elimination of banned areas.

Before September 25th still did not obtain emission permits enterprises, in accordance with the "two three" standard ban in place.

Please be more business owners to model enterprises to visit, learn, according to standards and time nodes as soon as possible to build up, to eliminate the "fluke" mentality and "wait and see" thinking. The present policy is time bound, and we should not miss the opportunity and suffer from it!